The set contains:<\/p>\n
Regulator suitable for standard 2 kg and 6 kg CO2 cylinders.<\/p>\n
1 m hose<\/p>\n
Floor cleaner<\/p>\n
2 kg CO2 cylinder, refillable<\/p>\n
28 mm ring spanner<\/p>\n
<\/p>\n
Assembly:<\/p>\n
On your Quooker, the hose is cut approximately 5 cm from where it enters the internal regulator (the one the cylinder attaches to). It would be a very good idea to unscrew the original 425-gram cylinder.\u00a0by<\/strong>\u00a0You cut the hose... Save it as a backup, if necessary,\u00a0get it refilled<\/a>\u00a0if it's empty.<\/p>\n The cut should be as straight as possible and made with a hose cutter or sharp knife.<\/p>\n The collar on the hose fitting is unscrewed and the hose is passed through.<\/p>\n The hose is pushed over the hose nozzle and the union nut is screwed on.<\/p>\n Use only your fingers, no tools, and tighten it well.<\/p>\n The original hose is fitted directly into the regulator.<\/p>\n If the original hose cannot reach, attach the supplied hose using the connector.<\/p>\n A CO2 cylinder is mounted onto the regulator.<\/p>\n The pressure is adjusted to approx. 3 bar.<\/p>\n <\/p>\n