Quooker External CO2 Kit, Hard Pipe

The set contains:

Regulator suitable for standard 2 kg and 6 kg CO2 cylinders.

1 m hose

Floor cleaner

2 kg CO2 cylinder, refillable

28 mm ring spanner

Assembly:

On your Quooker, the hose is cut approximately 5 cm from where it enters the internal regulator (the one the cylinder attaches to). It would be a very good idea to unscrew the original 425-gram cylinder. by You're cutting the hose… Keep it as a backup, possibly., get it refilled if it's empty.

The cut should be as straight as possible and made with a hose cutter or sharp knife.

The fitting is placed on a piece of hose that DOES NOT go to the original regulator.

The supplied hose is fitted between the connection piece and the external regulator.

The CO2 cylinder is fitted to the regulator with a ring spanner.

The pressure is adjusted to approx. 3 bar.

If you run out of CO2 at any point, you can use the hose connector to reconnect the original regulator. The old 425 gram bottle is fitted and the empty 2 kg bottle refilled or exchanged.