Cooling kit for Keg King fermentation system, generation 3

The coil is constructed from 8 mm stainless steel tubing.

To install, you need to drill two 12.8 mm holes in the Fermenter King lid's pressure-release ports.

Insert the threaded ends through the holes using the silicone O-rings to create a seal on the underside of the lid. The threaded ends will protrude through the lid and can be secured tightly by the nuts on the outside of the lid.

Once in place, the coils in the tank can be easily separated to increase the contact area with the liquid.

54 cm long

4 spools at the bottom

The spools are offset so that they do not obstruct the operation of the safety valve or the centralised liquid collection pipe for the Fermenter King tanks.