Keg King Guten 70 litre brewing system
This stainless steel brewing system has many enhanced features that brewers will enjoy:
- Locking, robust, removable bottom tubes on the insert
- Telescopic overflow pipe
- Three-position drainage holder on the insert seat for easier lifting using natural buoyancy
- E-type camlock for flexible high-temperature silicone hose for pumping applications
- Lid with silicone gasket and central 47 mm hole for distillation equipment
- Boiler-mounted lid clamps
- Handle on insertsi with contour for use when lifting with waist (waist not included)
- Up to 18kg malt capacity
Our 70-litre brewing system requires 15 Amps
The 70L system is supplied as standard with:
- Stainless steel chiller (cooling coil)
- Hopspider (hop filter)
- Ball valve with 13mm hose connector
- Bottom filter for ball valve (Bazooka)
- Spare angle hose for pump
- Integrated stainless steel valve for speed (flow) regulation
- Integrated magnetic pump, can be operated separately
- Programmable controller with digital display
- Can programme up to 9 brewing steps and up to 9 hop additions
- Alarm / reminder function & manual override
- Memory for storing up to 9 recipes
- Temperature range: 25 – 100 ° C; division: 0.1 ° C
- Clear LCD screen
Brewery system dimensions:
- 800 mm high
- 42 mm wide across the lid
- 58 mm wide between handles
Specifications:
- Effect: 3000W adjustable from 100 to 3,000W in 100W increments
Equipped with a 15-ampere cord and a Danish 3-pin standard plug with earth.
If your socket can only handle 10 or 13 Amperes, you can run the system at a lower power output. However, it is strongly recommended to gain access to 16 Amperes.
If you have a 3-phase CEE socket (the red ones), there's a ‘quick and dirty’ trick where you can get a 230V/16A socket. CONTACT an electrician if you are in doubt.



