The set contains:
Regulator suitable for standard 2 kg and 6 kg CO2 cylinders.
1 m hose
Floor cleaner
2 kg CO2 cylinder, refillable
28 mm ring spanner
Assembly:
On your Quooker, the hose is cut approximately 5 cm from where it enters the internal regulator (the one the cylinder attaches to). It would be a very good idea to unscrew the original 425-gram cylinder. by You cut the hose... Save it as a backup, if necessary, get it refilled if it's empty.
The cut should be as straight as possible and made with a hose cutter or sharp knife.
The collar on the hose fitting is unscrewed and the hose is passed through.
The hose is pushed over the hose nozzle and the union nut is screwed on.
Use only your fingers, no tools, and tighten it well.
The original hose is fitted directly into the regulator.
If the original hose cannot reach, attach the supplied hose using the connector.
A CO2 cylinder is mounted onto the regulator.
The pressure is adjusted to approx. 3 bar.
If you run out of CO2 at any point, you can use the hose connector to reconnect the original regulator. The old 425 gram bottle is fitted and the empty 2 kg bottle refilled or exchanged.




Reviews
There are no reviews yet.